New Tooling Test - 1/4" FeTi Fountian
Date: 2006-03-28
Description
A quick test of the 3/32" end-burning nipple on the new toolset.
FeTi Driver was charged into a pyrotube casing, using my usual wax-treated clay nozzle and end-plugs. Fused with blackmatch and a little Meal/NC priming.
Comments
Worked pretty well.
Slightly finer FeTi would be better, I suspect larger particles were blocking the nozzle somewhat. However, it worked well and put on a good show for such a small device. It would make a nice wheel driver.
Attachments
| title | type | size |
|---|---|---|
| Video | video/x-msvideo | 4.916 Mbytes |
| Pre-Test Picture | image/jpeg | 35.387 kbytes |